Front Differential Carrier Mount Reinforcement Kit

USD$49.29

When beating on your truck offroad with oversized tires and a front locker, your front differential gets subjected to a huge amount of torque. This most often results in snapping or bending one of the two front Differential Carrier Mounting arms! Once one of these arms snaps, your front differential will be free-floating and start wreaking havoc on your oil pan and steering rack. Avoid this situation with our Front Differential Carrier Mount Reinforcement Kit.

Description

This kit provides 4 gusset plates that are laser cut from 1/4″ thick steel. Each of the 4 gussets is specifically shaped to match the unique profile of the left and right factory carrier mounting arms. We have made these gussets as large as possible to provide maximum strength gains without interfering with the surrounding factory steering rack components.

The factory carrier mounting arms must be removed from the vehicle in order to weld on our gussets. However, they are very accessible and can be quickly unbolted from the vehicle without removing the differential or any other components (Refer to the pictures taken under the vehicle).

 

***Please note that only the 1/4″ steel gussets are included in this kit. The factory Toyota Front Differential Carrier Mounts are NOT included. If you need to replace those, you can source them from a vehicle part out, auto recycler, or directly from Toyota (  Toyota #52380-04061 for Driver Side and Toyota #52380-04071 for Passenger Side)

•Constructed from CNC-Laser cut from 1/4″ Steel

•Each of the 4 gusset in this set is shaped to fit the unique inner and outer profiles of the left and right arms

•Welding Required

 

•Fits the following vehicle models:

-2003-2024 Toyota 4Runner

-2005-2023 Toyota Tacoma

-2007-2013 Toyota FJ Cruiser

-2003-2024 Toyota Land Cruiser Prado 120/150

-2003-2024 Lexus GX460/GX470

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.
(The 4th gen 4runner is shown, but the build process is nearly identical to this bumper).

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.

Don't see exactly what you're after?

We at Coastal Offroad are more than happy to work with our customers to design their dream bumper. Feel free to send us an email (support@coastaloffroad.com) for any custom requests.