4TH GEN DODGE RAM 1500 Warlock and Ram 1500 Rebel Front Bumper Kit

From: USD$774.54

This is a high clearance DIY weld-together bumper kit for the 4th generation Dodge Ram 1500 Rebel (2015-2018) and Dodge Ram 1500 Warlock Classic (2019-2023). It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your Ram look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37" tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.


This bumper uses a total of 8 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren’t previously possible.

The optional lower skid plate protects your vulnerable radiator and engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides.

In addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 4 locations to mount 3×3″ surface mount LED pod lights as well as a center cut out sized to fit all 30″ single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.

•DIY Weld-together kit – This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)

•This bumper only fits the 2015-2018 Dogdge Ram 1500 Rebel and  2019-2023 Dodge Ram 1500 Warlock Classic. It DOES NOT fit the 5th generation non-classic Dodge Ram 1500. For 2009-2023 Non-warlock 4th gen Ram 1500’s and 1500 Classics, the correct bumper can be found here: https://www.coastaloffroad.com/product-page/4th-gen-dodge-ram-1500-front-bumper-kit/

•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product

•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines – this bumper protrudes less than 2″ from the center of the grill!

•Heavy duty 3/16″ plate steel construction for maximum offroad strength and durability

•Optional 1/4″ 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings)

•Bolts directly to frame using a total of 8 factory mounting points – no drilling required

• Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids

•Integrated 9/16″ thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

•Four Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3×3 surface mount pod light

•30″ Single Row Light bar cut out – slotted mounting tabs included

•Pre-drilled to mount front license plate

•Optional heavy duty grill and headlight tubing for added protection

Additional information


, ,

Body Lift Adjustment (NOT suspension lift)

, , , ,



Engine/Radiator Skid Plate


Cree LED Lights

, , , , , , , ,

3/4" Recovery Shackle (Pair)


Bumper assembly

As for welding, with everything designed using CAD software and then CNC laser-cut to size, the pieces fit together perfectly and this makes for a very simple assembly process. All kits come with detailed instructions with plenty of clearly labelled diagrams that are made using cutting-edge CAD software. This bumper kit is well within the ability of a novice welder and many customers have purchased it as their very first welding project with great results! This is made possible by the clean parts fit-ups and thick material. These are two factors that make welding significantly easier. Welding is one of those skills that is easier to learn than you may think and once you can do it, you’ll wonder how you ever got by without it. Alternatively, many individuals buy the kits and then have a local welder assemble it for them. Even in this case, it typically ends up being less expensive than buying a pre-fabricated bumper – especially after considering the lower shipping costs of our kits vs. fully assembled bumpers.

Bumper weight

Steel base bumper weight: 115lbs
Aluminum base bumper weight: 57 lbs

Optional steel skid plate weight: 28 lbs
Optional aluminum skid plate weight: 13 lbs


Forget the outrageous lead times of many bumper options that are measured in months. All of our bumper kits ship within 3-10 business days with 2-day shipping


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.
(The 4th gen 4runner is shown, but the build process is nearly identical to this bumper).

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.

Don't see exactly what you're after?

We at Coastal Offroad are more than happy to work with our customers to design their dream bumper. Feel free to send us an email (support@coastaloffroad.com) for any custom requests.