4th Gen Dodge Ram 1500 Kickout Rock Slider Weld-Together Kit (Bolt on)

From: USD$766.06

This is a DIY weld-together rock slider kit for the 4th generation (2009-2018) Dodge Ram 1500 and 2019+ Ram 1500 Classic. While the sliders themselves are a weld-together kit, absolutely no welding, drilling or cutting of the actual vehicle is required! We specifically designed these sliders to be a modification-free installation so they can be removed from the vehicle without leaving a trace that they were ever there. However, don't think for a second that this means the sliders aren't built for heavy offroad hits. These sliders mount directly to your Ram 1500's frame using C-shaped 1/4" thick steel mounting plates that wrap around the outer, bottom and inner walls of the truck's main frame rail. We finish these off with heavy gauge square tubing inner legs and the largest reinforcing gussets that we could fit under there.


These aren’t your average round tube sliders. The inner rails and mounting legs are made from 2×2″ heavy wall square tubing and finished with large 1/4″ thick CNC-cut and bent frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. We bend the C-shaped frame mounting brackets in-house, with each bracket custom tailored to the Ram’s frame profile at each mounting point. This allows us to mount these sliders to the truck using all factory holes in the Ram’s frame. No frame drilling, welding or modification required. Our C-shaped frame mounting brackets wrap around the outer, bottom and inner faces of the frame, and then we run bolts through the outer and inner walls of the frame and into nuts that get secured on the backside. This means that in order for these rock sliders to fail, you would have to simultaneously snap the heads off the 1/2″ to 5/8″ diameter bolts and deform the 1/4″ thick steel brackets enough to lift away from your frame! You can rest assured that these sliders will hold up to whatever trail hits you can throw at them.

This mounting design also ensures that those big trail  impacts will get spread out over a large area of your truck’s frame. Some sliders use skimpy round tubing mounting legs that mount directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through the vehicle’s frame under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.

These sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck.  To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by CAD diagrams. On the 4th gen Ram, the relationship between the frame rails and the rocker panels means the sliders must be dropped down from the frame slightly which can complicate installation. The 6 (3 per side) mounting legs in this kit ship pre-cut with the perfect angles and lengths so the sliders can be positioned at the perfect angle and distance from the vehicle without any guess work or frustrating angle cuts. The pictured sliders are set at a 5 degree angle to provide great ground clearance and a convenient step to reach your roof rack or truck bed.

• DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together – everything you need for assembly and installation included

•This rock slider kit only fits the (2009-2018) 4th generation Dodge Ram 1500 and (2019-2023) Dodge Ram 1500 Classic. It DOES NOT fit the 5th generation non-classic Dodge Ram 1500.

•NO Drilling, cutting or welding of the actual vehicle required – these sliders can be removed from your Dodge Ram without a trace that they were ever installed.

• Detailed instructions and diagrams – the step by step directions and professionally made diagrams make these a perfect first welding project

• CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and pickup bed

•96″ Length provides full wheel well to wheel well protection

• 2 x 2″ – 3/16″ wall square tubing inner rails provide excellent foundational support compared to lesser round tube sliders

•C-shaped 1/4″ thick frame mounting brackets and gussets distribute forces evenly into your vehicle frame to prevent damage

•Includes brackets and detailed instructions to adjust the position of the factory parking brake cable, which Dodge placed directly in the way of rock sliders on the driver’s side!

•Hilift jack can be used anywhere along the slider length to lift the vehicle

• 45 degree tapered inner rails to glance off obstacles

• Sold in pairs

Additional information

Vehicle Wheelbase Length

, , ,

Kickout Rock Slider weight

Slider Weight: 85.4lbs each (170.8lbs for the set)


Forget the outrageous lead times of many bumper options that are measured in months. All of our bumper and slider kits ship within 3-10 business days with 2-day shipping


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.
(The 4th gen 4runner is shown, but the build process is nearly identical to this bumper).

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way.

Don't see exactly what you're after?

We at Coastal Offroad are more than happy to work with our customers to design their dream bumper. Feel free to send us an email (support@coastaloffroad.com) for any custom requests.