2nd Generation Mercedes Sprinter High Clearance Front Bumper Kit

From: CAD$871.15

This is a high clearance DIY weld-together winch bumper kit for the 2nd gen (2007-2013) Mercedes Sprinter. It features a reinforced bolt-on design, protected winch mount, LED pod light mounts and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Dodge Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 105lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3/16" P&O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.

Description

Due to the construction of the front end of the Mercedes Sprinter van, there are only four tiny M8 factory bolt holes per side available to mount an aftermarket bumper. While this is totally inadequate for an offroad winch bumper, some aftermarket bumpers mount to the Mercedes Sprinter using only these mounting points! If a thick steel bumper is poorly mounted to the vehicle, no matter how strong the bumper is, it will simply fail at its mounting points should an impact or recovery pull occur. Instead, our engineers came up with intermediate mounting brackets that bolt to your Mercedes Sprinter’s main structural frame rails approximately 8″ back from the end of the frame. Two 1/2″ bolts per side get run through the van’s frame rails and into these heavy duty brackets. This results in a total of 12 mounting points between this bumper and your Mercedes sprinter van. While this is certainly overkill, it ensures that impact and winching forces are evenly distributed across your Mercedes Sprinter’s frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 2nd generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most.

Despite the extra mounting points, this bumper still uses the factory M8 frame mounting points to attach it to the vehicle as well, meaning that there is absolutely no guess-work required when fitting the bumper to the vehicle. The factory mounting points will locate the bumper perfectly on the vehicle, and then the supplied bumper plates come pre-cut with the holes to locate the rest of the mounting holes needed. The four 1/2″ bolts tie the winch area of the bumper directly into the vehicle’s main frame rails, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. Other notable features include the four integrated LED pod light mounts, optional grill and headlight protection hoops for increased wildlife protection, and optional front hitch receiver to allow a variety of recovery and gear carrying options.

The profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2007-2013) Mercedes/Dodge Sprinter as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Sprinter owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35″ tires.

We finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a 20″ or 30″ light bar cut out), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9/16″ recovery points that are placed directly in line with the Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Sprinter frame as part of the bumper’s main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 107lbs for the steel bumper and 55lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.

Other notable features include the optional grill and headlight protection hoops for increased wildlife protection and an optional front hitch receiver to allow a variety of recovery and gear carrying options. (available by custom request – please send us an email and we’d be happy to discuss further).

•DIY Weld-together kit – This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)

•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product

•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines

•Includes intermediate mounting brackets which provide maximum strength for the most demanding offroad conditions – bumper mounts to frame using a total of 12 mounting points!

•Heavy duty 3/16″ plate steel construction for maximum offroad strength and durability

•Optional 1/4″ 5052 aluminum for a lightweight yet very durable overlanding setup (53lb weight savings)

•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids

•Reinforced 9/16″ thick clevis mounts allow the use of 3/4″ D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

•Four integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights

•Integrated license plate mount

•Optional heavy duty grill and headlight tubing for added protection

Additional information

Tubing

, ,

Material

,

Bumper assembly

As for welding, with everything designed using CAD software and then CNC laser-cut to size, the pieces fit together perfectly and this makes for a very simple assembly process. All kits come with detailed instructions with plenty of clearly labelled diagrams that are made using cutting-edge CAD software. This bumper kit is well within the ability of a novice welder and many customers have purchased it as their very first welding project with great results! This is made possible by the clean parts fit-ups and thick material. These are two factors that make welding significantly easier. Welding is one of those skills that is easier to learn than you may think and once you can do it, you’ll wonder how you ever got by without it. Alternatively, many individuals buy the kits and then have a local welder assemble it for them. Even in this case, it typically ends up being less expensive than buying a pre-fabricated bumper – especially after considering the lower shipping costs of our kits vs. fully assembled bumpers.

Bumper weight

Steel base bumper weight: 105 lbs
Aluminum base bumper weight: 52 lbs

Shipping

Forget the outrageous lead times of many bumper options that are measured in months. All of our bumper kits ship within 3-10 business days with 2-day shipping

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Don't see exactly what you're after?

We at Coastal Offroad are more than happy to work with our customers to design their dream bumper. Feel free to send us an email (support@coastaloffroad.com) for any custom requests.