This bumper uses a total of 12 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren’t previously possible.
The optional lower skid plate protects your vulnerable radiator, front differential and other lower engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. This skid plate also has side “wings” that sit in front of the notoriously exposed and low-hanging front suspension mounts. This will help prevent bent suspension mounts that can throw off your alignment and result in expensive repair bills. As can be seen in the pictures, this skid plate tucks extremely tight to the front end of the vehicle and gives a shocking amount of extra ground clearance where it counts most! Simply put, you will be able to take lines on the trail that previously were not possible with your stock bumper and skid plates. To finish it off, this skid plate has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides.
In addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 2 locations to mount 3×3″ surface mount LED pod lights. These lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.
NOTE: Does NOT fit 2018-2020 front end. At this time, we do not offer a version to fit the 2018-2020 front end style or the factory parking sensor system but please reach out if you’d like to help us make it happen!
•DIY Weld-together kit – This bumper arrives as precision CNC-laser cut and bent plates that you then weld together (detailed assembly instructions included)
•NO Drilling, cutting or welding of the actual vehicle required – this bumper can be installed and removed from your F150 without a trace that it was ever there!
•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product
•Compatible with drop bracket lifts, standard suspension lifts, and body lifts (Optional Skid Plate requires modification for drop bracket lifts)
•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines – this bumper protrudes less than 3″ from the center of the grill!
•Heavy duty 3/16″ plate steel construction for maximum offroad strength and durability
•Optional 1/4″ 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings)
•Bolts directly to frame using a total of 12 factory mounting points – no drilling required
•Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)
•Integrated 9/16″ thick clevis mounts maximize clearance and allow the use of ¾” D-Rings
•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3×3″ surface mount pod light
•Pre-drilled to mount front license plate
•Optional heavy duty grill tubing for added protection
There are no reviews yet.